Short answer: use tile adhesive for porcelain and vitrified tiles, tiles 60×60 cm or larger, tile-on-tile renovation, walls, bathrooms and anything outdoors. Sand-cement mortar is only safe for small, absorbent ceramic tiles on a fresh base. In Pakistan in 2026 a good polymer adhesive such as SikaCeram-205 costs about Rs. 50–70 per sq ft for normal tiles, more than cement, but it is the main reason tiles stop popping off (hollow tiles).
Why porcelain tiles come off sand-cement
Porcelain and vitrified tiles absorb almost no water (under 0.5%), so cement paste has nothing to grip. Add the big temperature swings of a Pakistani summer and roof slab movement, and the tile debonds and sounds hollow. Polymer tile adhesives grip by adhesion, not just suction, and flex slightly.
Cost per sq ft (prices on 7 Nov 2026)
- SikaCeram-205 (C2TE, flexible, for porcelain and large tiles): 25 kg bag Rs. 4,500. Uses 3–4 kg/m² for normal tiles with an 8 mm notched trowel → about 67–90 sq ft per bag → Rs. 50–67 per sq ft. Large tiles laid with double buttering use more.
- SikaCeram-90 (cement-based tile bond for ceramic tiles): Rs. 680 for 20 kg, Rs. 1,450 for 40 kg. The budget step up from site-mixed mortar.
- SikaCeram-103 (white): Rs. 2,100 per 20 kg, for marble and light stone that grey adhesive would stain.
Which to use where
- Floor, small ceramic tiles, ground floor: SikaCeram-90 or sand-cement.
- Porcelain, glazed vitrified or 60×60 and larger: SikaCeram-205.
- New tiles over old tiles: SikaCeram-205; cement will not bond to glaze.
- Bathroom and kitchen walls: SikaCeram-205 (its "T" rating means tiles do not slip down the wall).
- Marble or white stone: SikaCeram-103 White.
- Roofs, terraces, outdoors: a flexible C2 adhesive, over waterproofing.
Laying tips
- Spread with a notched trowel and back-butter tiles larger than 30×30 cm.
- Mix with clean water only: 6.75–7.25 litres per 25 kg bag of SikaCeram-205.
- Press tiles within the open time and check full coverage by lifting one tile.
- Grout after 24 hours with SikaCeram-600 (seven colours, Rs. 320 per kg).
FAQs
Tile bond aur cement mein kya farq hai?
Tile bond (adhesive) mein polymer hota hai jo chikni porcelain tile ko bhi pakarta hai. Cement sirf kachi, pani choosne wali ceramic tile par theek kaam karta hai.
What does C2TE mean?
C = cementitious, 2 = improved adhesion, T = no slip on walls, E = extended open time.
Detailed comparison: SikaCeram-205 PK vs sand-cement mortar.