Sikadur-32 LP: Two-part epoxy structural bonding agent for high temperatures, including bonding new concrete to old. It comes in a 5 kg set (A+B) and is coming soon at ProBuild: request it on WhatsApp for price and availability.
Where to use Sikadur-32 LP
- Bonding fresh concrete to hardened concrete
- Bonding concrete, stone, ceramics, masonry, steel, wood and glass
- Bonding agent before repair mortars and micro-concrete
Key facts
- Coverage: ~1.3 kg/m² per mm of thickness; layer up to ~1 mm.
- Mixing: Part A : Part B = 2 : 1 by weight or volume.
- Application temperature: +20 °C min / +40 °C max
- Shelf life: 24 months from production
- Standards: EN 1504-4 structural bonding
- Packs: 5 kg and 1.2 kg ready-to-mix A+B units
- Made for hot climates: application +20 °C to +40 °C
- Works on dry and damp concrete, no primer needed
- Hardens without shrinkage
Figures are from Sika Pakistan's product data sheet; always follow the current data sheet on site.
How to apply
- Clean the surface to sound concrete; it can be dry or damp.
- Mix the whole A+B unit (2:1) with a slow drill until one even grey colour.
- Brush or roll a layer up to about 1 mm onto the surface.
- Place the new concrete or mortar while the epoxy is still tacky, within its open time.
Price and availability in Pakistan
Sikadur-32 LP is on ProBuild's coming soon list. Prices for these items are given on request because they depend on stock and quantity. Message us on WhatsApp from the product page and we will confirm price, pack size and delivery anywhere in Pakistan.
FAQs
Why use an epoxy bonding agent?
New concrete poured against old concrete forms a weak joint. Sikadur-32 LP bonds the two into one structural piece.
Sikadur-32 LP or SBR latex?
SBR (SikaLatex-200) is for general bonding and mortar improvement. Sikadur-32 LP is a structural epoxy bond for critical joints.