Short answer: in November 2026, the waterproofing material for a flat concrete roof in Pakistan costs roughly Rs. 55–90 per sq ft with a cementitious slurry such as SikaTop-107 Seal or SikaSeal-105 (used under tiles or screed), and more for an exposed acrylic membrane such as Sikalastic-510, which needs no tiles on top. Labour, crack repair and any tiles or screed are extra.
Which system suits your roof
- Roof that will stay open (no tiles): an elastic, UV-resistant liquid membrane. Sikalastic-510 is brushed on in 2–3 coats over a primer, reinforced with Sika Fab-1 mesh at cracks and corners.
- Roof that will get tiles or a screed: a cementitious slurry underneath. SikaTop-107 Seal is flexible (better for slabs that move); SikaSeal-105 is the economical choice.
- Old mud and brick-tile (khaprail) roof: usually best stripped back to the slab first. These layers hold water and push it through.
Material cost worked out (prices on 7 Nov 2026)
- SikaTop-107 Seal: 1 kg/m² per coat × 2 coats. One 25 kg set (Rs. 8,000) covers about 12.5 m² ≈ 134 sq ft → about Rs. 60 per sq ft.
- SikaSeal-105: 2–4 kg/m² in total. One 25 kg kit (Rs. 7,800) covers 6–12 m² ≈ 67–134 sq ft → about Rs. 58–116 per sq ft, depending on thickness.
- Sikalastic-510: 0.5 kg/m² per coat, 2–3 coats, plus primer at 0.2 kg/m². Sold in a 16 litre bucket (Rs. 19,580). Message us your roof size for an exact bucket count.
- Joints and cracks: Sika MultiSeal BT butyl tape (Rs. 1,799 per 5 m roll) for parapet joints and pipes; Sikadur-20 Crack Seal (Rs. 3,995) for fine slab cracks.
Example: a 1,000 sq ft (≈ 93 m²) roof tiled over SikaTop-107 Seal needs about 186 kg, so 8 sets (Rs. 64,000) including a little wastage. Prices change, so check the product pages for today's rate.
Steps that make it last
- Clean the roof, remove loose plaster and old flaking coatings, and clear every drain.
- Fix slope problems so water does not stand.
- Seal cracks and the joints at parapets, pipes and water tanks first.
- Apply the coats on a dry day, never before rain, and not in the hottest part of the afternoon.
- Run the coating 6–8 inches up the parapet wall.
- Cure as the datasheet says before foot traffic or tiling.
FAQs
Chat leakage ka sab se acha chemical kaun sa hai?
Khuli chhat ke liye Sikalastic-510 jaisi elastic coating. Agar upar tiles lagani hain to neeche SikaTop-107 Seal ya SikaSeal-105.
When is the best time to waterproof a roof in Pakistan?
October to May, well before the monsoon, on dry days.
Does waterproofing also reduce roof heat?
A light-coloured coating reflects more sun than grey concrete. See our roof heat proofing guide.
Full method: Roof leakage solution.